Round Belts (Round Belting)
| DuraBelt fabricates resilient endless round belts, (also called round belting, O-ring belts or endless drive belts) for power transmission applications and live roller conveyors, i.e., lineshaft conveyors and powered roller conveyors. Urethane round belts are elastomeric belts, meaning they are designed to stretch, so they do not require belt tensioners or take-ups. Key features are: |
Round Belts
Line-shaft Round Belt
Shown without spool and c-clips,
which are absolutely necessary!
Center distance between shaft and
roller should be at least 5" (130mm)
|
- Cross-sections from 1/16" to 3/4", also most metric sizes (2mm to 18mm) and standard O-ring sizes.
- Any length above 3" cut length (depends on cord cross-section).
- Durometers: 60A, 70A, 75A, 76A, 80A, 83A, 85A, 88A, 90A, 92A, 95A, 100A, 53D
- Colors: clear, orange, red, green,
blue, light blue, white, yellow, brown, black. Also see Post-Color process
- Textures: smooth or rough/matte finish.
- Economical -- no tooling charge.
- Best resilience of any elastic material.
- Tough & durable.
- Highly resistant to cuts and abrasion.
- Non-marking.
- Won't fray.
- Fits round or V pulleys.
- Easily cleaned.
- Most are Food Grade USDA/FDA approved.
- Some are detectable by metal detectors (Metal Detectable)
- Available with UV resistance.
- Available in Anti Static (Static Dissipative)
- Available in Jungle or Nautical urethane.
- Warning, do not use urethane belts on slider beds.
- Many Applications.
|
For the best in endless round belts and round belting, insist on DuraBelt.
Also see:
Copyright © 2019 Dura-Belt, Inc. All Rights Reserved. Site Index
